|
Car Trouble - Mechanical Question
02-01-2015, 04:23 PM
|
#1
|
Recycles dryer sheets
Join Date: Jun 2010
Posts: 370
|
Car Trouble - Mechanical Question
The right front wheel of my car fell off today. No one hurt. The tow driver indicated some 'bolt' came loose from the ball joint.
Just six weeks ago I had my car in for inspection and in order to pass the following work was done.
- Replaced the right front stabilizer bushing
- Replaced both front control arm bushings
Could the above work have contributed to the failure I had today? Is the ball joint related to the above work? I.e. Is it possible the 'bolt' that came loose might not have been properly tightened/replaced when the bushings work was done?
I know nothing about cars but want to be know what questions I should ask tomorrow when I speak to the mechanic. I feel like maybe the work done at inspection time might have contributed to the wheel falling off.
|
|
|
|
Join the #1 Early Retirement and Financial Independence Forum Today - It's Totally Free!
Are you planning to be financially independent as early as possible so you can live life on your own terms? Discuss successful investing strategies, asset allocation models, tax strategies and other related topics in our online forum community. Our members range from young folks just starting their journey to financial independence, military retirees and even multimillionaires. No matter where you fit in you'll find that Early-Retirement.org is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with our members, see fewer ads, upload photographs, create a retirement blog, send private messages and so much, much more!
|
02-01-2015, 04:55 PM
|
#2
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Mar 2007
Posts: 14,328
|
It might help if you identified the vehicle make /model / year. If they replaced the control arm bushings, they almost certainly removed the pinch bolt and removed the ball joint studs temporarily.
In short, yes, they probably forgot to re-torque a bolt.
|
|
|
02-01-2015, 04:56 PM
|
#3
|
Recycles dryer sheets
Join Date: Jun 2010
Posts: 370
|
The car is a 2007 Chevy Cobalt. Thanks travelover
|
|
|
02-01-2015, 05:03 PM
|
#4
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Mar 2007
Posts: 14,328
|
The bolt this hyper guy takes out at the 33 second and 1:45 point is the bolt that was probably left loose. See how the ball joint falls out when the bolt is removed in the later segment?
|
|
|
02-03-2015, 08:46 AM
|
#5
|
Thinks s/he gets paid by the post
Join Date: Sep 2013
Location: Cincinnati, OH
Posts: 4,373
|
Agree it is likely that the ball joint bolt was left loose. Replacing the lower control arm requires the ball joint to be disconnected.
You should go back to the shop that did the work and they should admit they screwed up and pay for the damages and repair costs. It may help to have your mechanic write up something for you. The shop that did the work will most likely want to do the repair themselves.
__________________
The problem isn't artificial intelligence, it's natural stupidity.
You can't spend yourself to prosperity.
Semi-Retired 7/1/16: working part-time (60%) for now [4/24/17 changed to 80%]
Retired Aug 2, 2017; age 53
|
|
|
02-04-2015, 05:07 PM
|
#6
|
Recycles dryer sheets
Join Date: Jun 2010
Posts: 370
|
The Chevy dealership that did the inspection work would not admit to being responsible. HOWEVER, as a 'goodwill' gesture (their words) they replaced the right front axle and control arm with 'good' (their words) used parts. They did not charge me for the used parts nor any labor charges.
I understand that they don't was to admit responsibility nor can anyone prove with 100% certainty that they were responsible. In any event, I am satisfied (for now) with the outcome. Sure hoping those 'good' used parts hold up.
|
|
|
02-04-2015, 05:46 PM
|
#7
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Mar 2007
Posts: 14,328
|
Quote:
Originally Posted by LauAnn
The Chevy dealership that did the inspection work would not admit to being responsible. HOWEVER, as a 'goodwill' gesture (their words) they replaced the right front axle and control arm with 'good' (their words) used parts. They did not charge me for the used parts nor any labor charges.
I understand that they don't was to admit responsibility nor can anyone prove with 100% certainty that they were responsible. In any event, I am satisfied (for now) with the outcome. Sure hoping those 'good' used parts hold up.
|
Sounds like you are satisfied with the outcome, but ball joint studs don't just come loose. They screwed up and won't admit it. I wouldn't go back there for any additional work.
|
|
|
02-04-2015, 06:03 PM
|
#8
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: May 2005
Posts: 17,241
|
Quote:
Originally Posted by LauAnn
The Chevy dealership that did the inspection work would not admit to being responsible. HOWEVER, as a 'goodwill' gesture (their words) they replaced the right front axle and control arm with 'good' (their words) used parts. They did not charge me for the used parts nor any labor charges.
I understand that they don't was to admit responsibility nor can anyone prove with 100% certainty that they were responsible. In any event, I am satisfied (for now) with the outcome. Sure hoping those 'good' used parts hold up.
|
Nobody has to proof with 100% certainty.... in small claims court you just have to prove that it was more likely than not that they were the cause.... and that would be pretty easy IMO...
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads
|
|
|
|
|
|
|
|
|
|
|
|
|
» Quick Links
|
|
|