[cute fuzzy bunny]

I still cant find anything about water pressure differentials between the 1" and 3/4" products.

I think I'm going to do something a little different and see how it works out. One of the chief problems with either size is clogging up of the filters...the carbon "taste and smell" filters usually clog a lot faster than the "sediment" filters.

So I'm thinking of getting a pair of the 3/4" filters, connecting them in line with each other with a six inch piece of copper, and then placing those where the water softener used to be. I'm going to put an inexpensive high volume sediment filter in the first one, and one of the more expensive taste and smell carbon filters in the second.

That way the cheapo sediment filter will take most of the dirt and bits of crap and keep the more expensive filter flowing. I should be able to get a longer life out of the more expensive filter and overall better water pressure/flow. I'll just change the cheap sediment filter as it clogs and change the carbon filter on every other sediment filter change.

Clearly I need to find more interesting things to do with my life... :P