|
|
08-31-2015, 08:37 AM
|
#1001
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Jul 2008
Posts: 35,712
|
I bought mine just 2 years ago, and my wife still had the receipt. However, on the Web site, they did not ask for it, just a photo to make sure of the model number.
I thought that for a replacement cartridge, they did not ask for the receipt (what else can you do but to install it on Pfister faucet), but for an entire faucet how do they check for fraudulent claim?
Oh, I remember that the Web site says they may want the old faucet back.
__________________
"Old age is the most unexpected of all things that happen to a man" -- Leon Trotsky (1879-1940)
"Those Who Can Make You Believe Absurdities Can Make You Commit Atrocities" - Voltaire (1694-1778)
|
|
|
|
Join the #1 Early Retirement and Financial Independence Forum Today - It's Totally Free!
Are you planning to be financially independent as early as possible so you can live life on your own terms? Discuss successful investing strategies, asset allocation models, tax strategies and other related topics in our online forum community. Our members range from young folks just starting their journey to financial independence, military retirees and even multimillionaires. No matter where you fit in you'll find that Early-Retirement.org is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with our members, see fewer ads, upload photographs, create a retirement blog, send private messages and so much, much more!
|
08-31-2015, 11:03 AM
|
#1002
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Mar 2007
Posts: 14,328
|
Quote:
Originally Posted by NW-Bound
I bought mine just 2 years ago, and my wife still had the receipt. However, on the Web site, they did not ask for it, just a photo to make sure of the model number.
I thought that for a replacement cartridge, they did not ask for the receipt (what else can you do but to install it on Pfister faucet), but for an entire faucet how do they check for fraudulent claim?
Oh, I remember that the Web site says they may want the old faucet back.
|
The rep I talked to was falling over backward helpful. When I got the new faucet assembly, it was missing a tiny, but crucial, part and she FedEx'ed the little part out immediately.
|
|
|
09-02-2015, 01:26 PM
|
#1003
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Mar 2007
Posts: 14,328
|
Recharged my car's AC today. The car is 8 1/2 years old and has never had the AC serviced, so I don't think that I have a significant leak, but the AC was just barely working. I used straight (no sealer or dye) 134A and a hose with gauge from WallyWorld - $30. The whole process took about 5 minutes and the AC is plenty cold now.
|
|
|
09-02-2015, 02:31 PM
|
#1004
|
Full time employment: Posting here.
Join Date: Feb 2014
Posts: 731
|
DS's bathroom - leaking toilet needed a new flapper gasket and the fluorescent light (behind a fixture lens) went bad.
I made him do the repairs as "OJT".
|
|
|
09-02-2015, 03:25 PM
|
#1005
|
Moderator Emeritus
Join Date: Apr 2011
Location: Conroe, Texas
Posts: 18,645
|
Quote:
Originally Posted by travelover
Recharged my car's AC today. The car is 8 1/2 years old and has never had the AC serviced, so I don't think that I have a significant leak, but the AC was just barely working. I used straight (no sealer or dye) 134A and a hose with gauge from WallyWorld - $30. The whole process took about 5 minutes and the AC is plenty cold now.
|
Summer's almost over? No/limited A/C until now? Check your heater's operation too!
__________________
*********Go Astros!*********
|
|
|
09-02-2015, 03:37 PM
|
#1006
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Mar 2007
Posts: 14,328
|
Quote:
Originally Posted by aja8888
Summer's almost over? No/limited A/C until now? Check your heater's operation too!
|
Very rarely use the AC, but it is high 80's and humid in MI right now, so I indulged. Plus the hybrid battery is also cooled by the AC, so it the AC doesn't work, no more electric mode. Figured I'd better recharge it before the low pressure switch kicked in.
|
|
|
09-02-2015, 03:41 PM
|
#1007
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Sep 2005
Location: Northern IL
Posts: 26,821
|
Quote:
Originally Posted by travelover
Very rarely use the AC, but it is high 80's and humid in MI right now, so I indulged. Plus the hybrid battery is also cooled by the AC, so it the AC doesn't work, no more electric mode. Figured I'd better recharge it before the low pressure switch kicked in.
|
Plus, defrosters depend on the A/C to pull out the humidity. So you still need A/C in winter.
-ERD50
|
|
|
09-02-2015, 03:44 PM
|
#1008
|
Moderator Emeritus
Join Date: Apr 2011
Location: Conroe, Texas
Posts: 18,645
|
Quote:
Originally Posted by ERD50
Plus, defrosters depend on the A/C to pull out the humidity. So you still need A/C in winter.
-ERD50
|
Depends on where you are in winter.
__________________
*********Go Astros!*********
|
|
|
09-02-2015, 04:08 PM
|
#1009
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Sep 2005
Location: Northern IL
Posts: 26,821
|
Travelover is in MI, so he's gonna need 'em.
-ERD50
|
|
|
09-03-2015, 01:50 PM
|
#1010
|
Recycles dryer sheets
Join Date: Jun 2014
Posts: 337
|
Going to have to change the cold water valve on a bathroom faucet.. It is a discontinued ceramic Kohler model and this is the second cold water valve of this type that has gradually gotten tight to the point it almost can't be closed. I have three sinks with these values and not one of the hot sides show any problem. Decided to buy a hot and cold spare just in case, seeing that the line has been discontinued. Don't want to have to change out 1 or more complete sets of fixtures in the next couple of year just because a simple valve is not available!
|
|
|
09-03-2015, 02:39 PM
|
#1011
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Sep 2005
Location: Northern IL
Posts: 26,821
|
Quote:
Originally Posted by robertf57
Going to have to change the cold water valve on a bathroom faucet.. It is a discontinued ceramic Kohler model and this is the second cold water valve of this type that has gradually gotten tight to the point it almost can't be closed. I have three sinks with these values and not one of the hot sides show any problem. Decided to buy a hot and cold spare just in case, seeing that the line has been discontinued. Don't want to have to change out 1 or more complete sets of fixtures in the next couple of year just because a simple valve is not available!
|
Is this the type with two ceramic discs that slide past each other? I've had those get super tight on me (this was a single hot/cold faucet though), and I was able to take it apart and separate the two discs. They were encased in a plastic carrier - and the carrier snapped when I pried it apart, but it was all held in place by the faucet, so that wasn't a problem. Once they were apart, I just cleaned them up, put a little silicone grease on them I think, and they were fine.
I'll bet that your water heater is trapping the sediment - it settles in the tank, and that is why the cold side is giving you problems. I had that issue with the hose screens on our wash machine inlet. The cold would clog up, hot was fine. I finally installed an external filter on the cold side.
Some of the newer water heaters have a dip tube that is supposed to stir up the sediment so that it doesn't form an insulating layer in the tank, but I bet that causes more problems with the faucets.
-ERD50
|
|
|
09-03-2015, 06:44 PM
|
#1012
|
Thinks s/he gets paid by the post
Join Date: Apr 2006
Location: North Bay
Posts: 1,246
|
Replaced the charging port on my Dell XPS13 laptop. The computer would run off of the AC charger, but the battery is stuck at 17% and would not charge. Now after buying a new AC charger and replacing the charging port....the problem has not been resolved. You Tube has a few more potential fixes to try, but I am skeptical.
|
|
|
09-03-2015, 07:21 PM
|
#1013
|
Thinks s/he gets paid by the post
Join Date: Aug 2014
Location: Chicago West Burbs
Posts: 2,998
|
We had a catastrophic failure on our well pressure tank. 40 Gallons of water sprayed all over (plus how much the pump put out before I could shut it off). Whoever decided to put the utility room on the upper level of this house? Mumble Mumble..... I then replaced the RO water system after the pressure tank on it ruptured the bladder reducing the available flow rate. This week we decided to make a pro-active replacement to my 28 year old water heater. That took a full day what with hauling the tanks down and up stairs, replumbing water lines, gas lines, vent lines and such.
It is nice to be able to do this type of work any day of the week and not be encumbered with a 5 or 6 day work week!
|
|
|
09-03-2015, 07:31 PM
|
#1014
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Jun 2002
Location: Texas: No Country for Old Men
Posts: 50,004
|
Quote:
Originally Posted by CRLLS
Whoever decided to put the utility room on the upper level of this house?
|
That should be a federal offense.
__________________
Numbers is hard
|
|
|
09-03-2015, 08:06 PM
|
#1015
|
Moderator Emeritus
Join Date: Apr 2011
Location: Conroe, Texas
Posts: 18,645
|
That's as bad as hot water tanks in the attic, like around here.
__________________
*********Go Astros!*********
|
|
|
09-03-2015, 08:15 PM
|
#1016
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Jun 2002
Location: Texas: No Country for Old Men
Posts: 50,004
|
Yep, a disaster waiting to happen. With the increased efficiency requirements that went into effect in April, many new water heaters are now too large to fit into attic openings due to increased insulation.
Truly adding insult to injury.
__________________
Numbers is hard
|
|
|
09-03-2015, 08:36 PM
|
#1017
|
Thinks s/he gets paid by the post
Join Date: Mar 2010
Location: Kerrville,Tx
Posts: 3,361
|
Or as in Houston were all water pipes are in the attic in many homes. Every so often it gets down to 10 in Houston, and in particular if it happens when folks are not home, you get to replace the plumbing (as well as ceilings). One Christmas this happened and you could see water running out of a lot of garages.
|
|
|
09-03-2015, 08:44 PM
|
#1018
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: Jun 2002
Location: Texas: No Country for Old Men
Posts: 50,004
|
Quote:
Originally Posted by meierlde
Or as in Houston were all water pipes are in the attic in many homes. Every so often it gets down to 10 in Houston, and in particular if it happens when folks are not home, you get to replace the plumbing (as well as ceilings). One Christmas this happened and you could see water running out of a lot of garages.
|
I was living in Houston at the time (1980?) and two guys I worked with were on vacation and out of town when this happened. One returned home to discover his 'sunken living room' really was. The other had so much damage he had to move out for several months while the entire house was gutted and redone.
__________________
Numbers is hard
|
|
|
09-03-2015, 09:00 PM
|
#1019
|
Moderator Emeritus
Join Date: Apr 2011
Location: Conroe, Texas
Posts: 18,645
|
Quote:
Originally Posted by REWahoo
Yep, a disaster waiting to happen. With the increased efficiency requirements that went into effect in April, many new water heaters are now too large to fit into attic openings due to increased insulation.
Truly adding insult to injury.
|
Yes, and having a sawsall handy helps with the installation!
Sawsall.jpg
__________________
*********Go Astros!*********
|
|
|
09-04-2015, 05:19 AM
|
#1020
|
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
Join Date: May 2004
Location: SW Ohio
Posts: 14,404
|
Quote:
Originally Posted by REWahoo
Yep, a disaster waiting to happen. With the increased efficiency requirements that went into effect in April, many new water heaters are now too large to fit into attic openings due to increased insulation.
Truly adding insult to injury.
|
Sure, users see it as a big problem, but the regulators and other "interested parties" probably have no problem with it. After all, we can still get a tank up there, it just has to be smaller ("Good, the wasteful public will have to take shorter showers"). Or, we transition to a tankless system ("Good, we make more money selling those, and lots of jobs will be created installing new venting systems, new circuits. "Shovel ready jobs'"). Only the consumer loses.
Plumbing in the attic: PEX tubing should help quite a bit. It's not freeze-proof, but much more "resistant" to rupturing than copper, PVC, galvanized iron. My SILs house in Austin was plumbed with GI pipe (in the crawlspace) 50 years ago when it was built, it's slowly corroding until the flow rate is very low. Millions of homes with that stuff will need to be entirely re-plumbed. What were they thinking when they used it? "This is $200 cheaper than copper, new home buyers don't seem to notice or care."
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads
|
|
|
|
|
|
|
|
|
|
|
|
|
» Quick Links
|
|
|