Dawg52
Give me a museum and I'll fill it. (Picasso) Give me a forum ...
First of all let me clarify I am a dumb ass and know nothing about nothing. Of course most of y'all already knew that. But today I was washing a load of clothes and the thing stops on the rinse cycle. Won't empty the water or go into the spin cycle. This is a cheapo model my aunt had in the house and is roughly 10 years old. So I brought up my old Whirlpool that I had stored in the basement, but it has not been used for close to 10 years. Hook it up and sure enough, it worked. But it did smell a little funky, but I just blew it off thinking it was because it had just set up for so long.
I sat there and watched it as I didn't want to leave it and the motor over heats or something. It emptied the water out after the wash cycle and then added water for the rinse cycle. But dammit if it didn't do the same thing, sits there making a grinding noise(other machine made no noise) and never completes the rinse cycle or go into the spin mode.
Two machines doing the same thing. Am I missing something or is this just a common problem for older machines? I could understand this if today was Halloween.
I sat there and watched it as I didn't want to leave it and the motor over heats or something. It emptied the water out after the wash cycle and then added water for the rinse cycle. But dammit if it didn't do the same thing, sits there making a grinding noise(other machine made no noise) and never completes the rinse cycle or go into the spin mode.
Two machines doing the same thing. Am I missing something or is this just a common problem for older machines? I could understand this if today was Halloween.