aja8888
Moderator Emeritus
I used a metal cutting blade, but I think most any blade would work, although with a cheap one it might be a single use operation. The metal skin on the safe is incredibly thin. You could fold a sheet of aluminum foil in half 2 or 3 times and get the same thickness. Under that is a couple inches of insulation, then the inner shell is thin plastic. No real security at all.
After cutting the front off, I went ahead and cut the main part in half so I would have three pieces instead of two. That made it easy to load in the car and haul away.
Be sure to put a disposable drop cloth down -- cutting through that insulation creates a lot of dust!
Thanks!